TJM XGS Torsion Bars have been designed to carefully match the complete XGS Suspension Range.

Torsion bars are designed to be used on the front of many two and four wheel drive vehicles.  While providing excellent ride quality, some vehicles fitted with torsion bars may suffer in their ability to carry loads and nose-dive under braking which results in loss of ground clearance.  TJM XGS Torsion Bars are available as an upgrade to improve a vehicles load carrying ability and stability, both on and off road.  TJM XGS Torsion Bars are often larger in diameter to the original unit, increasing spring rate which ensures ride height is maintained and vehicle handling both on and off the road is improved. To significantly improve your vehicle’s suspension performance TJM XGS Torsion Bars work best when TJM coil or leaf springs are fitted to the rear of your vehicle.

A sway bar is a torsion bar mounted laterally on suspension and is designed to reduce side sway. The sway bar transfers movement from one side of the suspension to the other. This is done through the connection of a torsion bar to each side of an axle by sway bar links.

TJM XGS Greasable Shackles make the relatively messy and time consuming task of bush lubrication incredibly easy. A greased shackle pin greatly reduces friction and operating temperatures and prolongs the life of the bush. However, grease will dissipate over time and it therefore necessary to regrease. Standard shackles make this an arduous task but TJM XGS Greasable Shackles and pins allow the greasing of bushes without the need to remove
the springs.

Available for most leaf spring vehicles, TJM XGS Greasable Shackles are heavy duty replacement components made to exacting tolerances and nickel plated for long
service life.

When springs are installed on a vehicle, quite often the existing U-bolts are re-used, which could create a potentially dangerous situation.  If the original U-bolt is re-used the pitch of the thread may be stretched and the U-bolt nut may loosen allowing the spring pack to become loose.

It is advisable to replace U-bolts when new springs are installed.  TJM XGS U-bolts are matched in length to the TJM XGS Leaf Spring range to accommodate the increased stack height of the TJM XGS Spring.

The TJM XGS Polyurethane Bushes offer longer life when compared to rubber bushes.  They ensure positive location of suspension components leading to direct responsive steering, low maintenance and improved stability.  TJM offers a wide range of bush kits including Leaf Spring, Shock Absorber, Panhard Rod and Control
Arm Bushes.